|
Product Details:
|
| Material: | Synthetic Diamond, Natural Diamond | Available Size: | Q Series, T2 Series, T6 Series |
|---|---|---|---|
| Crown Profile: | Standard | Waterways: | Standard /Face Discharge /Turbo /Spiral |
| Thread: | DCDMA Standard | Color: | Black |
| Applicaion: | All Conventional And Wireline Core Barrel | Use: | Mining Exploration Diamond Drilling |
| Height: | 12mm 16mm 25mm | ||
| High Light: | core hole drill bits,diamond products core bits |
||
Face Discharge Natural Diamond HQ3 Surface Set Drill Bits
Descriptions:
Surface set bits are still a favoured alternative for softer formations, or in highly abrasive ground where the balance in an impregnated bit between matrix erosion and diamond wear would be upset by the aggressive rock conditions.
The core drill bit with natural-surface set is mainly used to drill relatively complete medium to high -hard formulations. There are 15 to 100 diamonds set on the matrix surface.
It's mainly made up of particles of diamonds, steel body and carbide powder. And the diamonds are utilized for making complex shapes of drill bits.
Features:
a) In drilling soft sedimentary rocks, our natural surface bit could be quite efficient.
b) Various diamond core drill bits (natural-surface set) are available as well as the crown profiles, diamond grades stone sizes and erosion-resistant features.
c) The profiles of the crown directly effects the drilling speed, hole diameter and core recovery.
d) Multistep bit drills usually work at the fastest speed but are less powerful in hard, broken conditions, so round or semi-flat profiles are preferred.
Specifications:
Diamond Core Drill Bit (Natural Surface Set)
It is suitable to drill medium-hard and soft formation stones. The specifications of Diamond Core Drill Bit (Natural Surface Set ) include AQ, BQ, BQ3, NQ, NQ3, NQTT, HQ, HQ3, HQTT, PQ, PQ3, PQTT, NWF, HWF, PWF, SWF, 412, NWD4, AWT, BWT, NWT, HWT, NTW, BTW, BWG, NWG, HWG, NMLC, and HMLC. Samples are available. The diamond core drill bit (natural surface set) is step and half round crown. Diamond sizes include: 6-10 spc, 10-15 spc, 15-20 spc, 25-30 spc, 30-40 spc, 40-50 spc, and 60-80 spc. They are A Grade, AA grade, and AAA grade.
Natural diamond surface set double tube and single tube core bit
Its functions are to drill medium hard and soft formation stones. The specifications of Natural diamond surface set double tube and single tube core bit are as follows: T2 56, T2 66, T2 76, T2 86, T2 101, TB 56, B66, B76, B86, B101, B116, T6 76, T6 86, T6 101, T6 116, T6 131, T6 146, TNW, T6H, LTK48, and LTK60. Samples are available. The natural diamond surface set double tube and single tube core bit is also steps and half round crowns. Diamond sizes are 6-10 spc, 10-15 spc, 15-20 spc, 25-30 spc, 30-40 spc, 40-50 spc, and 60-80 spc. They are A Grade, AA grade, and AAA grade.
Natural diamond noncoring bit
It is for noncoring drilling. The bits include 56mm and 76mm. Samples are available. The natural diamond noncoring bit is step and half round crown. Diamonds sizes include: 6-10 spc, 10-15 spc, 15-20 spc, 25-30 spc, 30-40 spc, 40-50 spc, and 60-80 spc. They are A Grade, AA grade, and AAA grade.
Specifications
| ITEM | DIAMOND BIT | REAMING SHELL | |||||
| "Q" Series Wireline | Size | Bit-set OD | Bit-set ID | ||||
| mm | inch | mm | inch | mm | inch | ||
| AQ | 47.60 | 1.88 | 26.97 | 1.06 | 48.00 | 1.89 | |
| BQ | 59.50 | 2.35 | 36.40 | 1.43 | 59.90 | 2.36 | |
| NQ | 75.30 | 2.97 | 47.60 | 1.88 | 75.70 | 2.98 | |
| HQ | 95.58 | 3.77 | 63.50 | 2.50 | 96.00 | 3.78 | |
| PQ | 122.00 | 4.80 | 84.96 | 3.35 | 122.60 | 4.83 | |
| Swedish Metric T2 Series | 36 | 36.0 | 1.417 | 22.0 | 0.866 | 36.3 | 1.429 |
| 46 | 46.0 | 1.811 | 32.0 | 1.260 | 46.3 | 1.823 | |
| 56 | 56.0 | 2.205 | 42.0 | 1.654 | 56.3 | 2.217 | |
| 66 | 66.0 | 2.598 | 52.0 | 2.047 | 66.3 | 2.610 | |
| 76 | 76.0 | 2.992 | 62.0 | 2.441 | 76.3 | 3.004 | |
| 86 | 86.0 | 3.386 | 72.0 | 2.835 | 86.3 | 3.398 | |
| 101 | 101.0 | 3.976 | 84.0 | 3.307 | 101.3 | 3.988 | |
| Swedish T Series | TAW | 47.6 | 1.875 | 23.2 | 1.31 | 48.0 | 1.89 |
| TBW | 59.5 | 2.345 | 44.9 | 1.77 | 59.9 | 2.36 | |
| TNW | 75.3 | 2.965 | 60.5 | 2.38 | 75.7 | 2.98 | |
Wireline core drilling products:
Geological Core Bits:
Impregnated Bit(T2-76/86/101,etc; BQ,HQ,NQ,PQ,etc)
Surface Bit(T2-76/86/101,etc; BQ,HQ,NQ,PQ,etc)
Reaming Shell(T2-76/86/101,etc; BQ,HQ,NQ,PQ,etc)
Core Barrels & spare parts:
core lifters, core lifter cases, stop rings, landing rings, landing shoulders, inner tube stabilizers, locking couplings, adaptor couplings,
inner tube and outer tubes wrenches, head assembly, Core Barells,
Warranty and Service
We always concerned about our clients and provides them with warranty and service support.
The factory ensures equipment warranty for the major assemblies and units efficient for 12 months. The clients are supplied with all needed spare parts, tooling and auxiliary facilities.
The authorized dealers possess service centers to execute product warranty liabilities, after-sales service and equipment repair. The clients’ staff is also provided with theoretical and practical company instructions and consultations on all matters concerning execution of work and equipment operation.
Q:Are you trading company or manufacturer ?
A: We are a specialized manufacturer.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
T/T, L/C, Western Union.
Q: What are your main products, and used for?
A: Our products include core bit, PDC bit, reaming shell, core barrel, casing, drill rod, drill rig and other drilling parts.
They are used for mineral exploration, geological drilling, geotechnical engineering and soil sampling.
Q: How about the delivery terms?
A: Min. order quantity: 1 piece. Transportation: By DHL/TNT/Fedex express, air, sea, train.
Q: How about discount?
A: Price is based on products and order quantity.
Q: Do you accept sample order?
A: Yes sure, please contact us for details.
Q: How about your after-sales service?
A: As a manufacturer, we offer promote technology support for all problems and questions. Besides, we accept goods return or replace for quality problem.
Q: Where is your factory located in?
A: Our factory is located in Jiangyin city,Jiangsu province, China.
Q: How does your company control the quality?
A: Quality first. In order to guarantee high quality for our products, Sinocoredrill usually makes a serious inspection for all products and raw materials in strict procedure
Contact Person: Amelia
Tel: 86-18051930311
Fax: 86-510-82752846
