|Type:||Horizontal Directional Drilling Machine ,Trenchless Rig||Warranty:||1 Year|
|Power:||1560/1620kw , 4 Diesel Engines||Pullback Force:||1000Tons/10450KN|
|Usage:||Trench Method , Laying Cables , Pipe Line ,horizontal Precipitation Engineering , Environmental Protection , Long Distance Pipes Supporting Engineering ,special Base Engineering And For Pilot-hole Of Push Pipe Engineering ,etc.||Certificate:||CE|
1000 Tons horizontal directional drilling machine,
Crawler hdd drill rig
Main technical features:
1. The combination of the rig's self-loading and unloading allows to board the trailer itself, saving time and effort.
2. The power of the main engine adopts the dual power configuration of four diesel engines, the power reaches 1600 KW, and the power of the diesel engine adopts the hydraulic coupling mode. The two power units of the diesel engines are separately configured, which can operate simultaneously and work independently, which greatly improves the construction safety and reduces Operating Costs. In the construction of drilling rigs, even if the diesel engine and hydraulic control unit adopt the products of the world's top technology, it is inevitable that there will be a failure in actual application. When a failure occurs, a group of diesel engines will stop, while the other one can still operate as usual, although the construction The speed slowed down a lot, but he was still able to ensure safe construction, improved safety and reliability, and also provided sufficient time for drilling rig repair work.
3. The power head adopts the low-speed high-torque hydraulic hydraulic top drive mode, and the starting torque is large. The spindle adopts a unique floating structure to facilitate the loading and unloading of the drill rod and reduce the wear of the drill rod screw.
4. The hydraulic system of the drilling rig adopts well-known hydraulic products at home and abroad. The electro-hydraulic proportional closed circuit cooperates with the open load sensing circuit, which has high reliability and advanced performance.
5. The operation of the drilling rig adopts the remote operation mode, the remote control, and the independent operation room provide the operator with a safe, reliable and clean operating environment.
6. The main machine is equipped with a random crane, which is used for on-site lifting of drill rods and drill bits, which reduces the labor intensity of the operator and facilitates on-site construction.
|Main Power||1560KW||390KW/2100rpm×4sets||Wei Chai|
|Main Power (High Power)||1620KW||405KW/2100rpm×4sets||Volvo|
|Power head||Spindle rotation speed range||
Low speed 0-45 rpm
High speed0-90 rpm
|Spindle maximum turning torque||
|Spindle instantaneous reversal shackle torque||270000 N.m|
|Spindle bore diameter||φ102 mm|
|Power head forward distance||11 .5m|
|Power head max push & pull force||10450 KN|
|Power head max push & pull speed||36 m/min||Six-speed transmission|
|Power head full load push & pull speed||8.5 m/min|
|Rack||High quality alloy steel welded to the mast|
|Angle of mast adjustment||8°- 16°|
|Mast height during transportation||Adjust according to the transportation vehicle|
|Lifting angle of mast during transportation||0°- 16°|
|Clamp||Max shackle torque||420000 N.m|
|Max tightening torque||210000 N.m|
|Crane||Max lifting capacity||63 KN|
|Wire rope diameter||φ12 mm|
|Wire rope length||120 m|
Steel track chassis, two-speed motor + walking reducer
High speed0-1.5 Km/h
Low speed0-0.75 Km/h
|Optional track chassis|
|Machine||Size (LxWxH)||20500×3200×3450 mm|
Contact Person: Eric