|
Product Details:
|
| Drilling Diameter: | 350mm | Drilling Depth: | 300m |
|---|---|---|---|
| Model: | TSJ-300X50 | Type: | Water Well Drilling Rig |
| Diesel: | Yuchai Diesel Engine 85~90kw | Mast Height (fully Extended): | 6.5m |
| Maximum Lift Capacity: | 15ton | ||
| High Light: | 600m borehole drilling rig,650mm borehole drilling rig,yuchai borehole drilling rig |
||
TSJ-600X70 Deep Multi - Function 600m 650mm Truck Mounted Borehole Water Well
TSJ-600X70 can create drilling jobs in different strata, borehole diameter can up to 500mm . The rig with hydraulic technology, suporting gh torque hydraulic motor rotation and large bore hydraulic cylinder push, the multi cylinder engine of famous factory provides power for the hydraulic system, two stage airfilter, air compressor intake design, prolong the service life of diesel engine.
Max Drilling Depth :600m
Max Drilling hole diameter:φ500mm
Feed / Pulling thrust maximum capacity :35T
Feed / Pulling System :Oil cylinder wire rope pull back
I SPEED : 16 m/min
II SPEED: 24 m/min
Oil cylinder double speed mechanism, push and pull speed step less adjustable
Rotation
Rotation System:gear transmission,step less speed regulating
I torque: 7600Nm@55 r/min
II torque: 3500Nm @110r/min
Engine
Power:145KW Speed:2200 r/min
(Dongfeng Cummins ,Weichai Power Guangxi Yuchai brands )
Hydraulic system rotation: open system, load sensing variable pump, liquid proportion control
Push-pull: open system, load sensing variable pump, liquid proportion control
Cooling system: air cooling, liquid control
Operation room :The operation room is equipped with a built-in working table for separate installation with the host machine.
Chassis and drive
Crawler chassis: walking speed is 2.5km /h
1.Truck chassis: Shaanxi Automobile Long 8 X 4 (Engine Weichai)
2.Truck chassis: Dongfeng Chenglong 8 X 4 (Engine Cummins)
The economic speed is 70Km/h
The power is about Hp 290
Mast
Mast welded structure, mast working Angle 0-- 90°
Mast sliding stroke 1000mm
Rig winch crane (optional)
3.2T straight arm crane, working radius 6m.
Drill pipe
Drill pipe length is within 5.5 meters
Diameter Φ 89 thread NC31
Clamping system
Caliper/shackle clamp: adjustable spacing, accurate, stable, reliable shackle. Automatic centering of shackle and clamping of shackle
Jaws clamping spindle torque
9000Nm
Jaws reducing spindle torque
18000Nm
Wellhead: wellhead hydraulic chuck, through Φ 245 diameter
Mud pump (optional)
Maximum flow: 600L/min
Pressure: 0 to 8 mpa
Contact Person: Amelia
Tel: 86-18051930311
Fax: 86-510-82752846
