|Type:||Head Assembly||Size:||BQ NQ HQ PQ BQ3 NQ3 HQ3 PQ3|
|Standard:||Boart Longyear DCDMA||Application:||Double Tube Wireline Core Drilling|
|Materal:||High Quality Raw Material|
drilling rig parts,
wireline core drill parts
BWL NWL HWL PWL Double Tube Wireline Head Assembly Core Barrel Assembly
Wire-line core drilling equipment is very commonly used for mineral exploration for deep holes because of practical usage.
Sinocoredrill products are manufactured by using high quality raw materials and designed according to DCDMA, wire-line –Q standard.
We offers to clients following models of wire-line core barrel compatible with - Q Wire-line Standard Drilling Equipment;
Wire-line Double Tube Core Barrel; B, N, H, P sizes;
Wire-line Triple Tube Core Barrel; B-3, N-3, H-3, P-3 sizes;
Wire-line Core Barrel T2-76, T2-86, T2-101… T series;
All spare parts and conversion kits can be supplied as a kit or separate in order to reduce cost of coring system.
Wire line core barrels are used when coring to greater depths, mainly because they eliminate the need to couple and uncouple the rod string each time the core is retrieved. An overshot device is dropped on a cable and directly couples onto the inner tube assembly, allowing fast retrieval of the core after each core run. Available in DCDMA sizes B, N, H. and P.
|Specification||Core Barrel Type|
|B W/L||N W/L||H W/L||P W/L|
|Hole Diameter (mm)||59.9||75.7||96.3||122.8|
|Core Diameter (mm)||36.4||47.6||63.5||85.0|
|Kerf / Crown Thickness (mm)||11.6||13.9||16.2||18.5|
|Cutting Area (cm2)||18.3||27.2||41.1||61.7|
|Hole Area (cm2)||28.3||45.0||72.8||118.5|
|Cutting Area as % of Hole Area||64%||60%||56%||52%|
|Core Area (cm2)||10.3||17.8||31.7||56.8|
|Recommended Drill Rod||B W/L||N W/L||H W/L||P W/L|
|Conversion to triple tube possible||Yes||Yes||Yes||Yes|
Contact Person: Amelia