Product Details:
|
Type: | Wireline Double / Triple Core Barrel Assembly | Size: | BQ NQ HQ PQ BQ3 NQ3 HQ3 PQ3 T Series |
---|---|---|---|
Length: | 3m 1.5m | Standard: | DCDMA WIRELINE Q STANDARD |
Highlight: | drilling rig parts,wireline core drill parts |
Wireline Diamond core barrel Assembly 3m / 1.5m BQ NQ HQ PQ Head Assembly
The head assembly provides: latching and pivoting spearpoint mechanisms to allow insertion and retrieval of the inner tube assembly, a bearing assembly to allow the inner tube to remain stationary and avoid sample damage while drilling, fluid pressure operating indications and fluid control valves.
All head assemblies incorporate a shut off valve assembly which provides a fluid pressure signal to the drill operator when the valve members are compressed, indicating a full or blocked inner tube.
Sinocoredrill head assembly features long life span, good compatibility with parts like inner tube and outer tube from other vendors, and availability in all spare parts.
All With ISO certificate & quality control.
Specifications
1.NQ HQ PQ head assembly manufacture
2.NQ HQ PQ head assembly high quality
3.API&ISO NQ head assembly
4.on time delive
Core barrel introdution:
Used in loose, broken stratigraphic or coal extraction and protect rock (mine) heart of drilling tools.
Double core tube and tube has outer pipe, rinses through joint between the internal and external tube water flow to the bottom of the hole, protecting cores from rinses washouts. Double core tube has double motion and single movement two kinds. Double motion and core tube is internal and external core tube following bit and drill stem rotation, it in no serious loose or broken strata.
Single movement double core tube internal and external tube has bearing isolation, pipe outer pipe driven only pick up bit rotation, and broken rock tube does not rotate, avoid to core friction, vibration, etc., with mechanical damage, so it in serious loose fractured formations.these, can be well protected cores.
Use double deck core tube take core, bits need to use wall thickness of the alloy drill or diamond bits.
Due to the rock drill contact surface area increased and the lip use double deck core tube than ordinary core tube drilling efficiency to reduce. In the ledge, coal, in order to guarantee rock (mineral) heart take rate, rules must be use double deck core tube coring. More complex double core tube, except to finish single movement, in addition, aluminum, steel tube placed plastic or qualitative buckled half close tube, have a better protection of the core role.
Double core tube card broken cores and seal block within the next port, the core tube by the drill is placed in the core card fault device (fern, card spring, claw reed, etc.) to finish.
Item No. |
Part No |
Item Descriptions |
|
NQ |
HQ |
||
|
NQ-A-1 |
HQ-B-1 |
Core Barrel Assy 1.52m/5 Ft |
|
NQ-A-2 |
HQ-B-2 |
Core Barrel Assy 3.05m/10 Ft |
|
NQ-A-3 |
HQ-B-3 |
Inner Tube Assy 1.52m/5 Ft |
|
NQ-A-4 |
HQ-B-4 |
Inner Tube Assy 3.05m/10 Ft |
|
NQ 0000 |
HQ 0000 |
Head Assy |
1 |
NQ 0001 |
HQ 0001 |
Spearhead Point |
2 |
NQ 0002 |
HQ 0002 |
Compression Spring |
3 |
NQ 0003 |
HQ 0003 |
Detent Plunger |
4 |
NQ 0004 |
HQ 0004 |
Spearhead Base |
5 |
NQ 0005 |
HQ 0005 |
Spirol Pin |
6 |
NQ 0006 |
HQ 0006 |
Latch Retracting Case |
7 |
NQ 0007 |
HQ 0007 |
Spirol Pin |
8 |
NQ 0008 |
HQ 0008 |
Bolt |
9 |
NQ 0009 |
HQ 0009 |
Washer |
10 |
NQ 0010 |
HQ 0010 |
Upper Latch Body |
11 |
NQ 0011 |
HQ 0011 |
Latch Spring |
12 |
NQ 0012 |
HQ 0012 |
Latch |
13 |
NQ 0013 |
HQ 0013 |
Link |
14 |
NQ 0014 |
HQ 0014 |
Spiring Pin |
15 |
NQ 0015 |
HQ 0015 |
Stainless Steel ball,22mm |
16 |
NQ 0016 |
HQ 0016 |
Landing Indicator Bushing |
17 |
NQ 0017 |
HQ 0017 |
Lading Shoulder |
18 |
NQ 0018 |
HQ 0018 |
Lower Latch Body |
19 |
NQ 0019 |
HQ 0019 |
Hex Nut |
20 |
NQ 0020 |
HQ 0020 |
Spindle |
21 |
NQ 0021 |
HQ 0021 |
Shut-off Valve,Hard |
22 |
NQ 0022 |
HQ 0022 |
Valve Adjusting Washer |
23 |
NQ 0023 |
HQ 0023 |
Thurst bearing |
24 |
NQ 0024 |
HQ 0024 |
Spindle Bearing |
25 |
NQ 0025 |
HQ 0025 |
Hanger Bearing |
26 |
NQ 0026 |
HQ 0026 |
Compression Spring |
27 |
NQ 0027 |
HQ 0027 |
Self Lock Nut |
|
NQ 0028 |
HQ 0028 |
Inner Tube Cap Assembly(28,29,30,31) |
28 |
NQ 0029 |
HQ 0029 |
Grease Fitting |
29 |
NQ 0030 |
HQ 0030 |
Stainless Steel ball |
30 |
NQ 0031 |
HQ 0031 |
Inner Tube Cap |
31 |
NQ 0032 |
HQ 0032 |
Check Valve Body |
32 |
NQ 0033152 |
HQ 0033152 |
Inner Tube 1.52m/5Ft |
32 |
NQ 0033305 |
HQ 0033305 |
innerTube 3.05m/10Ft |
33 |
NQ 0034 |
HQ 0034 |
Stop ring |
34 |
NQ 0035 |
HQ 0035 |
Core lifter |
34 |
NQ 0035 |
HQ 0035 |
Fluted Core lifter |
35 |
NQ 0036 |
HQ 0036 |
Core lifter Case |
36 |
NQ 0037 |
HQ 0037 |
Locking Coupling |
37 |
NQ 0038 |
HQ 0038 |
Adpter Coupling |
38 |
NQ 0039 |
HQ 0039 |
Landing Ring |
39 |
NQ 0040152 |
HQ 0040152 |
Outter Tube 1.52/5Ft |
39 |
NQ 0040306 |
HQ 0040306 |
Outter Tube 3.05m/10Ft |
40 |
NQ 0041 |
HQ 0041 |
Inner Tube Stablizer |
Contact Person: Amelia
Tel: 86-18051930311
Fax: 86-510-82752846