Product Details:
|
Features: | High Penetration Rate, High Speed,High Performance | Material: | Natural Diamond |
---|---|---|---|
Type: | Surface-Set Diamond Bits | Use: | Mineral Exploration,Mineral Exploration |
Product Name: | Core Drill Bits | Crown Height: | 9mm, 12mm, And 14mm |
High Light: | diamond core drill bit,diamond products core bits |
Natural Diamond Multi Steps Surface Set Core Drill Bits With AAA Grade 40/60 Spc Diamond
Surface-Set Diamond Bits can be used with any tupe of core barrels.By varying the diamond grade,size,quality,and matrix hardness and crown shapes,the users can satisfactorily dril and core hard and homogeneous formations .
Surface-Set Non-coring Bits are drilling for broken formation rock which can't be cored. Crown are used to set with synthetic, natural or polycrystalline diamond. It's used for drilling in soft to medium hard formation rocks.
Notice :
To select the right bit for the job, assess the speed and power of your drill for the size and depths of the holes to be drilled and assess ground conditions such as rock type/formation and down-hole conditions.
Size:
SINOCOREDRILL bits are available in all standard drilling sizes . Also, non-standard sized bits can be produced according to requirements from clients.
Crown Height:
SINOCOREDRILL offers crown impreg depths of 9mm, 12mm, and 16mm .The taller crown heights provide improved bit stability and reduced vibrations, enhancing bit life and performance.
Waterways:
Various waterways are available for diamond impregnated bits. Differing waterways allow for better flushing in various ground conditions and drilling systems.
Matrix:
SINOCOREDRILL impregnated bits matrices can be selected by our engineer according to ground conditions at client's work site.
Threads:
standard Q threads as well as thread types required by clients are available.
Diamond Size |
Formation Drilled |
10/20 SPC* |
Soft formation |
20/30 SPC |
soft to medium formation |
30/40 SPC |
medium formation |
40/60 SPC |
Medium to hard formation |
< 60/80 SPC |
Very hard formation |
*SPC is short for Stone per Carat |
Rule of selecting diamond grade--the harder the rocks, the better the diamond
grade should be.
Face Profiles of surface set core bit:
Size Available:
Q Series: AQ,BQ,NQ,HQ,PQ/AQTK,BQTK,BQ3,NQ2,NQ3,NQTT,HQ3,HQTT,PQ3,PQTT
T2 Series: T2 46,T2 56,T2 66,T2 76,T2 86,T2 101
T6 Series: T6 76,T6 86,T6 101,T6 116,T6 131,T6 146, T6S 101
T Series: T36,T46,T56,T66,T76,T86
Z Series: Z46,Z56,Z66,Z76,Z86,Z101,Z116,Z131,Z146
B Series: B36,B46,B56,B66,B76,B86,B101,B116,B131,B146
WF Series: HWF,PWF,SWF,UWF,ZWF
WT Series: RWT,EWT,AWT,BWT,NWT,HWT
WM Series: EWM,AWM,BWM,NWM
WG Series: EWG,AWG,BWG,NWG,HWG
Others: NMLC,HMLC,LTK48,LTK60,BGM,NGM,ADBG,TBW,TNW,
ATW,BTW,NTW,NXD3,AX,NX,NXC,AXT,T6H,4 9/16,NWD4,412F,SK6L146,
TT46,TB56,TS116,CHD10
Contact Person: Amelia
Tel: 86-18051930311
Fax: 86-510-82752846