Nq Wireline Double Tube Core Barrel Assembly For Deep Hole Hard Rock Coring

NQ Wireline Double Tube Core Barrel Assembly For Deep Hole Hard Rock Coring
 

Size Available:

B76 core barrel, B86 core barrle, B101 core barrel, B131 core barrel, B146 core barrel
BQ core barrel NQ core barrel, HQ core barrel PQ core barrrel, NQ3 core barrel, HQ3 core barrel, PQ3 core barrel
TT-46 core barrel TT56 core barrel
T2-56 core barrel, T2-66 core barrel, T2-76 core barrel, T2-86 core barrel, T2-101 core barrel
T6-76 core barrel T6-86 core barrel T6-101 core barrel T6-116 core barrel T6-131 core barrel T6-131 core barrel
NMLC core barrel, HMLC core barrel
HWF core barrel, PWF core barrel
NWG core barrel, HWG core barrel
LTK48 core barrel
M101 core barrel
412 F core barrel

Chinese Standard: Wireline 56, wireline 59, wireline 75, wireline 91...

Wireline drilling is the special method of removing the core. When the driller wants to remove core from a conventional core drill, the entire core barrel has to be removed from the hole. This is time-consuming, as each rod has to be removed one at a time. With wireline drilling, a barrel of core can be removed from the bottom of the hole without removing the rod string. When the driller wants to remove the core, an overshot is lowered on the end of a wireline. The overshot attaches to the back of the core barrel inner tube and the wireline is pulled back and the inner tube disengages itself from the barrel.

Welcome to contact us for more information.

Specification:

Bottom jetting : Bottom jetting applicable to drilling sedimentary or metamorphic formations which containing more power,high coring recovery rate and avoid excessive washout of core.