Product Details:
|
Dill Depth Capacity: | 30/100/200m | Hole Diameter: | 96/75.7/60mm HTW NTW BTW |
---|---|---|---|
Core Diameter: | 63.5/56/42mm | Engine Power: | KUBOTA 23.5kw/3000rpm |
Hydraulic System: | 21MPa/max 54L/min Water Cooler | Maximum Toque: | 400NM |
Drill Angle: | 45°-90° | Platform Area/Module Quantity: | 2.5m X2.5 M / 4PCS |
Heaviest Module/Gross: | 176kg / 513kg | Type: | Full Hydraulic Core Drill Rig |
High Light: | 200m portable core drill rig,200m hydraulic drilling rig,alloy chassis portable core drill rig |
BTW 200M Portable Core Fully-Hydraulic Aluminum Alloy Chassis Drilling Rig
Both light and efficient, EP200 is a portable fully-hydraulic drill rig. It can drill up to 200 meters with
the capability to add on more for deeper drilling.
Various module combinations available for drilling rigs' different requirements:
1. Aluminum alloy chassis
2. The whole chassis drill rig
3. Crawler self-propelled drill rig
4. Vehicle-mounted drill rig
5. Asynchronous motor module
6. EP200 series horizontal drilling frame module
Features of EP series portable fully-hydraulic drillig rig:
1. Modularized with mast drilling frame
• Lightweight design with the heaviest module weighting less than 180Kg, manpower and does not require road construction;
• Mast drilling frame that can be easily transported and disassembled; does not require drilling derricks;
• Top-drive power heads; long-way guide rail; push by oil cylinders; does not require repeated rechucks;good orientation;
• Operated in small area; does not require foundation construction and environmentally-friendly.
2. Fully hydraulic transmission
• Flexible and lightweight design for easy operation and maintenance;
• Steady drilling with adjustable and high speed;
• Real-time over-pressure protection provided.
3.Thin-wall wireline coring technical
• The drilling pole system with well controlled borehole inclination;
• Thin-wall drill bit with small torque resistance, high cutting speed and drilling rate;
• Large coring diameter and high coring rate;
• Small annulus to reduce accidents and improve safety.
Application Fields
They are widely used for Geological Mineral Exploration, Infrastructure Construction Investigation, Water Conservancy and Hydropower Investigation,Railway/Highway/Bridge/Tunnel Investigation, Advanced Geological Forecast Drilling, Pile Validation and Core-drawing Investigation.
Parameters
Technical Parameter | |||
Drill pipe type | HTW/NTW/BTW | Winch | |
Drill pipe length | 1.0m | Average speed | 150m/min |
Drill depth capacity | 50/100/200m | Pulling force | 600kg |
Hole diameter | 96/75.7 /60mm | Wire rope diameter | 5mm |
Core diameter | 71/56/42mm | Rope capacity | 340m |
Hydraulic System | Mud Pump | ||
Engine power | KUBOTA Turbo-charged engines 1×23.5kw/3000rpm |
Max. flowrate | 75L/min |
Max. pressure | 21MPa | Max. pressure | 7MPa |
Max. flowrate | 66L/min | Gripper | |
Top Drive Rotation Head | Capacity | 114/HTW/NTW/BTW | |
Drilling angel | 45°- 90°& 0°- 90° matching bracket | ||
Max. torque | 400N·M | Platform area | 3mx3m×3.8m |
Rotation speed | 1100rpm | Module quantity | 6PCS |
Feed travel | 1.27m | Heaviest module | 176kg |
Pull/Thrust | 33KN/24KN (double cylinder force doubled) | Gross |
513kg |
Contact Person: Amelia
Tel: 86-18051930311